Filter performance characteristics
1. Efficient and accurate filtration: The special structure of the filter disc filtration technology has accurate and sensitive performance, ensuring that only particles smaller than the required particle size can enter the system, which is the most effective filtration system; the specifications are 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, etc., users can choose different precision filter discs according to water requirements. System flow can be flexibly adjusted according to needs.
2. Standard modularization, saving space: the system is based on standard disc filter unit, according to the modular design, users can choose according to their needs, flexible and changeable, and strong interchangeability. The system is compact and occupies a very small area, and can be installed flexibly by using the corner space. For example, the equipment with a water treatment capacity of about 300m3/h occupies only about 6m2 (general water quality, filtration grade 100μ).
3. Fully automatic operation, continuous water effluent: among the units in the filter combination, the backwashing process takes turns alternately, and the automatic switching between working and backwashing states can ensure continuous water output; the backwashing water consumption is very small, only It accounts for 0.5% of the water output; if combined with air-assisted backwashing, the self-consumption can be reduced to less than 0.2%. High-speed and thorough backwashing in just tens of seconds
4. Long service life: The new plastic filter element is firm, non-abrasive, non-corrosive, and has very little scaling. After years of industrial practical verification, there is no wear and tear after 6-10 years of use, no aging, and the filtering and backwashing effects will not be affected by use. deteriorated over time.
5. High quality and less maintenance: the products meet the corresponding quality standards, all products are tested and tested under simulated working conditions before leaving the factory, no special tools are required, and there are few parts; easy to use, only need regular inspection, almost no Routine maintenance is required.
The heat transfer oil furnace is also called the organic heat carrier furnace, commonly known as the heat transfer oil furnace boiler, and the official name is the thermal oil furnace. It is a new type of thermal energy equipment that uses coal
The mechanical filter is also called a pressure filter. It is an important part of the pretreatment of pure water preparation and water purification system. The material is steel lined rubber or stainless steel. According to the different filter media, it is divided into natural quartz sand Media filters, manganese sand filters, etc., can be divided into single-flow filters and double-flow filters according to the water inlet method, which can be used in combination or alone according to the actual situation.
Efficient and accurate filtration: The special structure of the filter disc filtration technology has accurate and sensitive performance, ensuring that only particles smaller than the required particle size can enter the system, which is the most effective filtration system